BD9P608MFF-C
Nano Pulse Control™ 오토모티브용 3.5V~40V 입력 6.0A 1ch 강압 DC-DC 컨버터
BD9P608MFF-C
Nano Pulse Control™ 오토모티브용 3.5V~40V 입력 6.0A 1ch 강압 DC-DC 컨버터
BD9P608MFF-C는 파워 MOSFET를 내장한 전류 모드 동기정류 강압 DC-DC 컨버터입니다.
Product Detail
기능 안전:
사양 :
ch
1
Integrated FET / Controller
Integrated FET
Topology
Buck
Synchronous / Nonsynchronous
Synchronous
Vin1(Min.)[V]
3.5
Vin1(Max.)[V]
40
Vout1(Min.)[V]
0.8
Vout1(Max.)[V]
8.5
Iout1(Max.)[A]
6
SW frequency(Max.)[MHz]
2.2
Light Load mode
Yes
EN
Yes
PGOOD
Yes
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
125
Package Size [mm]
4.5x3.5 (t=1.00)
Common Standard
AEC-Q100 (Automotive Grade)
특징 :
- Nano Pulse Control™
- AEC-Q100 Qualified (Grade 1)
- Minimum ON Pulse 50 ns (Max)
- Synchronous Buck DC/DC Converter Integrating POWER MOSFETs
- Soft Start Function
- Current Mode Control
- Reset Function
- Light Load Mode (LLM)
- Forced Pulse Width Modulation (PWM) Mode
- Phase Compensation Included
- Selectable Switching Frequency
- Spread Spectrum Switching
- External Synchronization Function
- Over Current Protection (OCP)
- Input Under Voltage Lockout (UVLO) Protection
- Thermal Shutdown (TSD) Protection
- Output Over Voltage Protection (OVP)
- Short Circuit Protection (SCP)
Reference Design / Application Evaluation Kit
-
- Evaluation Board - BD9P608MFF-TSB-001
This Evaluation Board was developed for ROHM’s single 440 kHz or 2.2 MHz buck DC/DC converter BD9P608MFF-C. BD9P608MFF-C is a current mode synchronous buck DC/DC converter with integrated POWER MOSFETs. The BD9P608MFF-C accepts a power supply input range of 3.5V to 40V and generates a maximum output current of 6A. BD9P608MFF-C generates an output voltage range of 0.8V to 8.5V using external resistors.