BD9B206ANF-Z (개발중)
2.7V to 5.5V Input, 2.0A Integrated MOSFET Single Synchronous Buck DC/DC Converter
BD9B206ANF-Z (개발중)
2.7V to 5.5V Input, 2.0A Integrated MOSFET Single Synchronous Buck DC/DC Converter
BD9B206ANF-Z is one of the BD9Bx06NF-Z series of single synchronous buck DC/DC converter with built-in low on-resistance power MOSFETs. It can provide current up to 2A. The output voltage can achieve a high accuracy due to ±1% reference voltage. It features fast transient response due to constant on-time control system. The Light Load Mode control improves efficiency in light-load conditions. It is ideal for reducing standby power consumption of equipment. Power Good function makes it possible for system to control sequence. It achieves the high power density and offer a small footprint on the PCB by employing 6 pins 1.5mm x 1.5mm small package. We also offer the lineup of products with Light Load Mode Control, as well as products with different Output Current.
이 제품은 차재 기기의 사용을 권장하지 않습니다.
Product Detail
사양 :
ch
1
Integrated FET / Controller
Integrated FET
Topology
Buck
Synchronous / Nonsynchronous
Synchronous
Vin1(Min.)[V]
2.7
Vin1(Max.)[V]
5.5
Vout1(Min.)[V]
0.6
Vout1(Max.)[V]
4
Iout1(Max.)[A]
2
SW frequency setting (Max.)[MHz]
2.2
Light Load mode
Yes
EN
Yes
PGOOD
Yes
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
125
Package Size [mm]
1.5x1.5 (t=1.00)
특징 :
- Single Synchronous Buck DC/DC Converter
- Constant On-time Control
- Light Load Mode Control
- ±1% Reference Voltage Accuracy
- 100% Duty Cycle
- Power Good Output
- Output Discharge Function
- Over Voltage Protection (OVP)
- Over Current Protection (OCP)
- Short Circuit Protection (SCP)
- Thermal Shutdown Protection (TSD)
- Under Voltage Lockout Protection (UVLO)
레퍼런스 디자인 / 어플리케이션 평가 Kit
-
- Evaluation Board - BD9B206ANF-EVK-001
This Evaluation Board was developed for ROHM's Single Synchronous Buck DC/DC Converter BD9B206ANF-Z. BD9B206ANFZ is a synchronous buck DC/DC converter with built-in low on-resistance power MOSFETs. The output voltage can achieve a high accuracy due to ±1 % reference voltage. It features fast transient response due to constant on-time control system. The Light Load Mode control improves efficiency in light-load conditions. It is ideal for reducing standby power consumption of equipment. Power Good function makes it possible for system to control sequence. It achieves high power density and offers a small footprint on the PCB by employing 6 pins in a 1.5 mm x 1.5 mm small package.
