Rohm Breadcrumb

Rohm Productdetail

2 Cell / 3 Cell Narrow VDC Charger with SMBus Interface - BD99950MUV

The BD99950MUV is a high-efficiency, synchronous Narrow VDC system voltage regulator and battery charger controller. It has two charge pumps which separately drive Nch MOSFETs for automatic system power source selection. Charge voltage, charge current, AC adapter current and minimum system voltage can be programmed through SMBus. With a small inductor, PWM switching frequency can also be programmed by SMBus up to 1.2MHz.

* 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다.
형명 | BD99950MUV-E2
상태 | 공급중
패키지 | VQFN20PV3535
포장 수량 | 2500
최소 포장 단위 | 2500
포장 사양 | Taping
RoHS | Yes

사양 :



Supply Voltage(Min.)[V]


Supply Voltage(Max.)[V]


Charge Voltage [V]


Operating Temperature (Min.)[°C]


Operating Temperature (Max.)[°C]


특징 :

  • N-channel MOSFETs available for Battery or
    Adapter Selection via Internal Charge Pumps
  • Fast DPM Transient Response under Turbo Mode (<100µs)
  • Linear Mode Trickle Charge via BGATE Charge Pump
  • Low Operating Current BGATE Charge Pump at 17µA (typical)
  • MLCC Output Capacitor
  • High Light Load Efficiency for Energy Star and ErP Lot6
  • Fast Load Current Transient Response under
    No Battery or Dead Battery conditions
  • NMOS-NMOS Synchronous Step-Down Controller
  • Programmable 600kHz-1.2MHz Switching Frequency
  • Programmable Charge Voltage (16mV resolution),
    Charger Current (64mA resolution),
    Input Current (64mA resolution),
    Minimum System Voltage (64mV resolution)
  • ±0.5% Charge Voltage Accuracy
  • ±3% Charge Current Accuracy
  • ±3% Input Current Accuracy
  • ±0.5% Minimum System Voltage Accuracy
  • ±2% 20x Input Current Amplifier Output Accuracy
  • Integrated Loop Compensation
  • Battery Learn Function
  • AC Adapter Operating Range : 6.0V to 24.0V
  • Off-State Battery Discharge Current at 15µA
  • 20pin 3.5mm×3.5mm QFN Package