BM1R00147F
고효율 · 대기 시 저소비전력 · 연속 모드 대응 2차측 동기정류 제어 IC
BM1R00147F
고효율 · 대기 시 저소비전력 · 연속 모드 대응 2차측 동기정류 제어 IC
BM1R00147F는 2차측 출력단에 사용되는 동기정류 컨트롤러입니다. 초저소비 고정밀도 션트 레귤레이터를 내장하여, 대기 시 전력을 대폭 삭감할 수 있습니다. 션트 레귤레이터는 완전히 독립된 chip으로 구성되어 있어, High Side에서 사용하는 경우에도 GND 기준으로 동작 가능합니다. 또한, 연속 모드 동작 시에는, 1차측의 스위칭 동기 신호를 입력 없이 동작 대응할 수 있어, 스페이스 절약화를 한층 더 실현할 수 있습니다. 폭넓은 동작 전원전압 (2.7V~32V)으로, 다양한 출력의 어플리케이션에 대응 가능합니다. 또한, 고내압 120V 프로세스 채용으로, 드레인 전압을 직접 모니터링할 수 있습니다.
Product Detail
사양 :
Channel
1
Controller Type
SR
Circuit Configuration
Flyback
Vin1 (Min.)[V]
2.7
Vin1 (Max.)[V]
32
Shunt Regulator Accuracy (%)
0.5
VCC OVP
Auto Restart
OVP
Fixed
Compulsion OFF Time (typ. μs)
2
FET
-
Drain Monitor Voltage [V]
120
BR PIN
No
Light Load mode
No
EN
No
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
105
Package Size [mm]
5x6.2 (t=1.71)
특징 :
- Built-in Ultra-Low Consumption Shunt Regulator Reducing Standby Power Consumption
- Synchronous Rectification FET Supports High and Low Side
- 120V High Voltage Process DRAIN terminal
- Wide Input Operating Voltage Range of 2.7V to 32V
- Supports LLC and PWM QR Controller
- No Input Required on the Primary-Side at CCM
- Built-in Overvoltage Protection for SH_IN and SH_OUT Terminal
- Built-in Thermal Shutdown Function
- Built-in Auto Shutdown Function
- SOP8 package
레퍼런스 디자인 / 어플리케이션 평가 Kit
-
- Evaluation Board - BM3G007MUV-EVK-001
This evaluation board outputs an isolated voltage of 12 V from an input of 90 Vac to 264 Vac, and the maximum output current is 8.3 A. It was developed mainly as a power supply for adapters. The average efficiency is 90.7% when VIN = 230V. The BM3G007MUV is GaN HEMT (650 V 70 mΩ), with integrated driver and protection circuitry. QR controllers for AC/DC power supplies use BM1Q021FJ.
-
- Evaluation Board - BM1R00147F-EVK-001
This evaluation board has provided the secondary-side synchronous rectification circuit using BM1R00147F. This evaluation board assumes that the primary side controller of insulated type with PWM flyback converter operates in DCM and set to 5V for output voltage. The secondary-side MOSFET uses ROHM’s RX1L16BGN. The secondary-side MOSFET can be located on High Side. (When the secondary-side MOSFET is located on Low Side, see “User’s Guide BM1R00147F-EVK-002 (No.60UG023E)”.)
-
- Evaluation Board - BM1R00147F-EVK-002
This evaluation board has provided the secondary-side synchronous rectification circuit using BM1R00147F. This evaluation board assumes that the primary side controller of insulated type with PWM flyback converter operates in DCM and set to 5V for output voltage. The secondary-side MOSFET uses ROHM’s RX1L16BGN. The secondary-side MOSFET can be located on Low Side. (When the secondary-side MOSFET is located on High Side, see “User’s Guide BM1R00147F-EVK-001 (No.60UG021E)”.)