BU33TD2WNVX
1ch 200mA CMOS LDO 레귤레이터
BU33TD2WNVX
1ch 200mA CMOS LDO 레귤레이터
BU**TD2WNVX / BU**TD3WG 시리즈는 초소형 패키지 SSON004X1010 (1.0mm×1.0mm×0.6mm)과 SSOP5 (2.9mm×2.8mm×1.15mm)를 채용한 200mA 출력의 고성능 Full CMOS 레귤레이터입니다. 회로전류 35μA의 저소비전류이며, 노이즈 특성 및 부하 응답 특성이 우수하여 로직 IC용 전원, RF용 전원, 카메라 모듈용 전원 등 다양한 용도의 어플리케이션에 최적입니다.
Product Detail
사양 :
ch
1
Withstand Voltage (Max.)[V]
6.5
Vin(Min.)[V]
1.7
Vin(Max.)[V]
6
Iout(Max.)[A]
0.2
Vout Type
Fixed
Vout Accuracy
±1.0% (Ta=25℃)
Circuit Current[mA]
0.035
Dropout Voltage (Typ.)[V]
0.22(Io=0.2A)
Ripple Rejection [dB]
70
Load Regulation[mV]
10(Io=0.01mA to 100mA)
Output Capacitor[µF]
0.22
Shutdown Function
Yes
Thermal Shut-down
Yes
Over Current Protection
Yes
Over Voltage Protection
No
Under Voltage Lock Out
No
Discharge Function
Yes
Soft Start
No
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
85
특징 :
・±1% 고정밀도 출력전압 (VOUT<2.5V의 제품은 ±25mV)・High ripple rejection：70dB(Typ. 1kHz)
・소형 세라믹 콘덴서 대응 (CIN=Co=0.47µF)
레퍼런스 디자인 / 어플리케이션 평가 Kit
-
- Reference Design - REF67011
- NFC Telemetry-Based Rotating Component Torque Sensing
In this reference design, a strain sensor and the ML7660-EVK-002 are attached to the shaft. It is now possible to directly measure and collect data on the strain of the rotating shaft, which was previously impossible.
Specifically, the measurement process follows these steps:
1) The power supply LSI wirelessly supplies power to the power receiving LSI.
2) The power receiving LSI supplies power to the strain sensor via a wired connection.
3) The strain sensor measures the strain of the rotating shaft.
4) The strain sensor sends the strain measurement data to the power receiving LSI via a wired connection.
5) The power receiving LSI wirelessly transmits the measurement data to the power supply LSI.This reference design uses the STREAL SR300 sensor manufactured by Glosel. If you plan to use Glosel sensors, please check directly with Glosel for availability and procurement details in advance.
https://www.glosel.co.jp/en/contact/
