BD00GC0WEFJ
1A 가변출력 LDO 레귤레이터
BD00GC0WEFJ
1A 가변출력 LDO 레귤레이터
BD00GC0WEFJ는 출력전류 1.0A 공급이 가능한 레귤레이터로, 출력 정밀도는 ±1%입니다. 패키지는 방열성이 우수한 HTSOP-J8을 채용하여, 디지털 가전 등 폭넓은 어플리케이션에 사용이 가능합니다.
본 기종은 출력 단락 등으로 인한 IC 파괴를 방지하는 과전류 보호회로, 셧다운 시의 회로전류를 0μA로 억제하는 ON / OFF 스위치, 과부하 상태 등으로 인한 열파괴로부터 IC를 보호하는 온도 보호회로를 내장하고 있습니다. 또한, 세라믹 콘덴서 대응으로 세트의 소형화 및 장수명화에 기여합니다.
We recommend BD00GC0JEFJ for your new development. It uses different production lines for the purpose of improving production efficiency. Electric characteristics noted in Datasheet does not differ between Production Line.
Product Detail
사양 :
ch
1
Withstand Voltage (Max.)[V]
15
Vin(Min.)[V]
4.5
Vin(Max.)[V]
14
Iout(Max.)[A]
1
Vout Type
Adjustable
Vout Accuracy
±1.0% (Ta=25℃)
Circuit Current[mA]
0.6
Dropout Voltage (Typ.)[V]
0.6(Io=1A)
Ripple Rejection [dB]
60
Load Regulation[mV]
25(Io=0 to 1A)
Output Capacitor[µF]
1
Shutdown Function
Yes
Thermal Shut-down
Yes
Over Current Protection
Yes
Over Voltage Protection
No
Under Voltage Lock Out
No
Discharge Function
No
Soft Start
Yes
Operating Temperature (Min.)[°C]
-25
Operating Temperature (Max.)[°C]
85
특징 :
・최대 출력전류 1.0A・고정밀도 기준전압회로 내장
・과전류 보호회로 내장
・온도보호회로 내장
・셧다운 스위치 내장
・출력전압 가변 타입 (1.5V to 13.0V)
・패키지 ： HTSOP-J8
레퍼런스 디자인 / 어플리케이션 평가 Kit
-
- Reference Design - REF66003
- Compact NFC Wireless Charge with 300mW Output
ML7661-EVK-001 is equipped with the power transmitting side LSI ML7661, and ML7660-EVK-001 is equipped with the power receiving side LSI ML7660. By facing the antenna, it is possible to output a power supply of 300mW. Wireless battery charging can be achieved in a small space.
The antenna is a product of Amphenol.
Datasheet Download:For any inquiries related to antennas, kindly use the inquiry form provided below.
Amphenol Website Contact Form
-
- Reference Design - REF67011
- NFC Telemetry-Based Rotating Component Torque Sensing
In this reference design, a strain sensor and the ML7660-EVK-002 are attached to the shaft. It is now possible to directly measure and collect data on the strain of the rotating shaft, which was previously impossible.
Specifically, the measurement process follows these steps:
1) The power supply LSI wirelessly supplies power to the power receiving LSI.
2) The power receiving LSI supplies power to the strain sensor via a wired connection.
3) The strain sensor measures the strain of the rotating shaft.
4) The strain sensor sends the strain measurement data to the power receiving LSI via a wired connection.
5) The power receiving LSI wirelessly transmits the measurement data to the power supply LSI.This reference design uses the STREAL SR300 sensor manufactured by Glosel. If you plan to use Glosel sensors, please check directly with Glosel for availability and procurement details in advance.
https://www.glosel.co.jp/en/contact/
