BD60210FV (신제품)
20V Output Current 1A (Continuous) 2ch Brush Motor Driver
BD60210FV (신제품)
20V Output Current 1A (Continuous) 2ch Brush Motor Driver
BD60210FV is a built in 2 H bridge motor driver for 2 DC brush motors, 1 bipolar stepper motor or 4 solenoid loads. This driver can drive high-efficiency by direct PWM control. It is possible to output an abnormal detection signal for Wired-OR that notifies each protection circuit operation, which contributes to set high reliability.
이 제품은 차재 기기의 사용을 권장하지 않습니다.
Product Detail
사양 :
Power Supply Voltage (Max.) [V]
18
Power Supply Voltage (Min.) [V]
8
Vcc (Max.)[V]
20
Iout (Max.)[A]
1
Iout Peak (Max.)[A]
4
Output On Resistance (Typ.)[Ω]
0.95
Number of Motors
2
Automotive class
No
Operating Temperature (Min.)[°C]
-25
Operating Temperature (Max.)[°C]
85
Package Size [mm]
5.0x6.4 (t=1.35)
특징 :
- Single Power Supply Input (Rated Voltage of 20V)
- Rated Output Current (Continuous) 1.0A/Phase
- Rated Output Current (Peak) 4.0A/Phase
- Low ON Resistance DMOS Output
- Forward, Reverse, Brake and Stop Functions
- Power Save Function
- Direct PWM Control
- Driver for 2 DC Brush Motors
- Driver for 1 Bipolar Stepping Motor
- Driver for Solenoid
- FULL STEP and HALF STEP Functionality (Driving Stepper Motor)
- Built-in Logic Input Pulldown Resistor
- Cross Conduction Prevention Circuit
- Thermal Shutdown Circuit (TSD)
- Over Current Protection Circuit (OCP)
- Under Voltage Lock Out Circuit (UVLO)
- Protects Against Malfunction when Power Supply is Disconnected (Ghost Supply Prevention Function)
- Adjacent Pins Short Protection
