Rohm Breadcrumb

Rohm Productdetail

Ultra-Small, VR12.0 / VR12.5 Digital Synchronous Buck Controller with Auto-Control® & SMBus™ / PMBus™ - PV3103

The PV3103 is a digital synchronous buck controller with adaptive loop compensation, for point-of-load (POL) applications. The PV3103 complies with the Serial VID (SVID) portion of Intel’s VR12 specification in order to support Intel-based memory, graphics and similar applications. Through SVID, the CPU can dynamically control the output voltage, slew rates, power states, as well as monitor the VR controller for telemetry purposes. In parallel to SVID, the PV3103 also supports a set of PMBus commands, allowing a BMC in a server application to configure, control and monitor the VR controller.

PV3103 uses Powervation’s proprietary adaptive digital control loop, Auto-Control, which adapts on a cycle-by-cycle basis, and provides active loop compensation to stabilize the control.

The digital functionality of this VR controller allows system telemetry (remote measurement and reporting) of current, voltage, and temperature information through its serial interfaces. Additionally, to maximize system performance and reliability, the IC provides temperature correction/compensation of several parameters. PV3103 is a fully protected DC/DC solution that utilizes analog and digital functionality to maximize system protection.

* 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다.
형명 | PV3103
상태 | 공급중
패키지 | UQFN28V4040V
포장 수량 | 2500
최소 포장 단위 | 2500
포장 사양 | Taping
RoHS | Yes

사양 :

Phase Count

1

QFN Package

4 mm x 4 mm

Supply Voltage

0.6 V to 1.52 V

Controller Bias

3.3

Interface SMBus

PMBus™ Compliant

Interface SVID

VR12 / VR12.5

Interface Parallel VID

N/A

Auto-Compensation

Auto-Control®: Real-Time Adaptive Auto-Tuning

Programmable Fsw

375 kHz - 1 MHz

Phase Add/Drop

N/A

DSS®

No

Single Pin CONFIG™

8 Tables

VSET

No

VTRACK

No

ADDR

No

System Good

No

Sensors / Precision Telemetry

VOUT, VIN, IOUT, EOUT

Sensors / Precision Telemetry Tsense Supported

Internal Die Sense & External

Fault Response OVP

Latch

Fault Response OCP

Latch

Fault Response SCP

Latch

Fault Response LOS

N/A

Fault Response OTP

Latch

Fault Response Phase Loss

N/A

SCP Temp Compensation

No

Support NTC Sensor

No

Configurable SALRT

No

Programmable Load-Line

No

Integrator Gain Scalar

No

Min. Operating Temperature [°C]

-25

Max. Operating Temperature [°C]

85

특징 :

• Auto-Control Real-Time Adaptive Loop Compensation
• Intel® Compliant Serial VID (SVID) Interface
• SMBus Interface with PMBus Power System Management Protocol
• Precision Measurement & Telemetry Reporting: VOUT, IOUT, VIN, EOUT, Temperature, Duty Cycle, fSW
• Programmable Protection & Warning
− Output OVP, OCP, SCP, LOS
− Input UVLO, OVLO
− External OTP, UT Warning, & OT Warning
• Single-Pin Configuration with Eight Profile Tables
• Power Management and Conversion
− VOUT Range: 0.6 V to 1.52 V
− ±0.5% VOUT, ±1.5% VIN, & ±3% IOUT Accuracy Over Temperature
− Remote Power Down
− Programmable Frequency (375 kHz to 1 MHz)
− Programmable VOUT
− Frequency Synchronization & Phase Alignment
− Programmable Precision Duty Cycle Limit
• Internal Anti-Fuse Based NVM
− -40°C to 125°C (20 year data retention rating)
• 28-Lead 4 mm x 4 mm QFN package (RoHS/PbF)