1.0A 출력 FET 내장 타입 고효율 강압 스위칭 레귤레이터 - BU90002GWZBU9000xGWZ는 최대 6MHz의 스위칭 주파수로 동작하고, 소형 · 고효율을 동시에 실현한 강압 스위칭 레귤레이터입니다. 최대 1.0A (VIN=3.0~5.5V 시)의 출력전류에 대응하여, 배터리 구동 휴대기기에 최적입니다. MODE 단자의 로직에 따라 강제 PWM 모드 또는 PWM / PFM 모드의 자동 전환을 선택할 수 있습니다. PFM 모드 시에는 자기 소비전류를 경감하여, 경부하 시의 효율을 개선합니다.
| ||||
* 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다. |
Grade | Standard |
ch | 1 |
Integrated FET / Controller | Integrated FET |
Buck / Boost / Buck-Boost / Inverting | Buck |
Synchronous / Nonsynchronous | Synchronous |
Vin1(Min.)[V] | 4.0 |
Vin1(Max.)[V] | 5.5 |
Vout1(Min.)[V] | 3.3 |
Vout1(Max.)[V] | 3.3 |
Iout1(Max.)[A] | 1.0 |
SW frequency(Max.)[MHz] | 6.6 |
Light Load mode | Yes |
EN | Yes |
PGOOD | No |
Operating Temperature (Min.)[°C] | -40 |
Operating Temperature (Max.)[°C] | 85 |
- ・Fast transient response
・Automatic PFM/PWM operation
・Forced PWM operation
・Internal Soft Start
・Under voltage lockout
・Over current protection
・Thermal shutdown
형명 | 제품 이름 | 패키지 | Datasheet | 유통 재고 |
---|---|---|---|---|
BU90008GWZ | 1.0A 출력 FET 내장 타입 고효율 강압 스위칭 레귤레이터 | UCSP35L1 | 구입 | |
BU90009GWZ | 1.0A 출력 FET 내장 타입 고효율 강압 스위칭 레귤레이터 | UCSP35L1 | 구입 | |
BU90003GWZ | 1.0A 출력 FET 내장 타입 고효율 강압 스위칭 레귤레이터 | UCSP35L1 | 구입 | |
BU90004GWZ | 1.0A 출력 FET 내장 타입 고효율 강압 스위칭 레귤레이터 | UCSP35L1 | 구입 | |
BU90005GWZ | 1.0A 출력 FET 내장 타입 고효율 강압 스위칭 레귤레이터 | UCSP35L1 | 구입 | |
BU90006GWZ | 1.0A 출력 FET 내장 타입 고효율 강압 스위칭 레귤레이터 | UCSP35L1 | 구입 |
Evaluation Board for ROHM's BU90002GWZ Synchronous Buck Converter with Integrated FET
This application note explains the calculation of external capacitor value for buck converter IC circuit.
This application note covers the steps required in choosing the inductor and to calculate the value used in buck regulator IC circuits.
This Application Note offers reference table to easily set resistor values for output voltage with various internal reference voltages VREF.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
Using unmatched MLCC may not obtain required target characteristics for power supply circuit and may cause abnormal operation. This application note explains the important points while using MLCC.
This application note describes how to obtain the power loss required to calculate the temperature of a semiconductor device. Temperature control is important to ensuring product reliability.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
This application note explains the features and things to consider when shopping for power inductors.
In buck converter ICs, many high-frequency noises are generated at switch nodes. A snubber circuit provides one way of eliminating such harmonic noise. This application note explains how to set up the RC snubber circuits.
This application note explains power loss factors and methods for calculating them. It also explains how the relative importance of power loss factors depends on the specifications of the switching power source.
This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.
For ICs