1ch 200mA CMOS LDO 레귤레이터 - BU27TA2WNVX

BU**TA2WNVX / HFV 시리즈는 초소형 패키지 SSON004X1216 (1.2mm×1.6mm×0.6mm)과 HVSOF5 (1.6mm×1.6mm×0.6mm)를 채용한 200mA 출력의 고성능 Full CMOS 레귤레이터입니다. 회로전류 40μA의 저소비전류이며, 노이즈 특성 및 부하 응답 특성이 우수하여 로직 IC용 전원, RF용 전원, 카메라 모듈용 전원 등 다양한 용도의 어플리케이션에 최적입니다.

* 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다.
포장 수량
최소 포장 단위
포장 사양
BU27TA2WNVX-TR 공급중 SSON004X1216 5000 5000 Taping Yes
사양 :
Grade Standard
Breakdown Voltage(Max.)[V] 6.5
ch 1
Vin(Min.)[V] 2.5
Vin(Max.)[V] 5.5
Vout (Typ.) [V] 2.7
Vout Precision ±1.0
Iout(Max.)[A] 0.2
Circuit Current[mA] 0.04
Output Short Current[mA] 70
Shutdown Function Yes
Thermal Shut-down Yes
Over Current Protection Yes
Over Voltage Protection No
Discharge Function Yes
Soft Start No
I/O Voltage Difference (Typ.)[V] 0.36(Io=0.2A)
Ripple Rejection [dB] 65.0
Load Regulation[mV] 10(Io=0.01 to 100mA)
Input Capacitor[µF] 1.0
Output Capacitor[µF] 1.0
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
특징 :
  • ・±1% 고정밀도 출력전압
    ・High ripple rejetion
    ・출력 디스차지 회로 내장
관련 상품
관련 신제품 / 갱신 제품파워 매니지먼트
형명 제품 이름 패키지 Datasheet 유통 재고
BU15TA2WNVX 1ch 200mA CMOS LDO 레귤레이터 SSON004X1216   구입
BU18TA2WNVX 1ch 200mA CMOS LDO 레귤레이터 SSON004X1216   구입
BU25TA2WNVX 1ch 200mA CMOS LDO 레귤레이터 SSON004X1216   구입
BU26TA2WNVX 1ch 200mA CMOS LDO 레귤레이터 SSON004X1216   구입
BU28TA2WNVX 1ch 200mA CMOS LDO 레귤레이터 SSON004X1216   구입
BU2JTA2WNVX 1ch 200mA CMOS LDO 레귤레이터 SSON004X1216   구입
New Products:
기술 정보
Table of resistance for output voltage setting on linear regulator Ics

This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

BHxxNB1, BUxxTA2 Series PCB Layout

The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.