PWM type DC/DC converter IC Integrated Switching MOSFET for non-Isolated type - BM2P161W (New)

The PWM type DC/DC converter series for AC/DC provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolated devices. This series has a built-in HV starter circuit that tolerates 650V, and it contributes to low power consumption. With a current detection resistor as internal device, it can be designed as small power supply. Since current mode control is utilized, current is restricted in each cycle and excellent performance is demonstrated in bandwidth and transient response. The switching frequency is fixed to 65 kHz. At light load, the switching frequency is reduced and high efficiency is achieved. A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in super junction MOSFET which tolerates 650V makes the design easy.

유통 재고가 없기 때문에 구입에 문의하십시오 --- 문의
* 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다.
포장 수량
최소 포장 단위
포장 사양
BM2P161W 공급중 DIP7K 2000 2000 Tube Yes
사양 :
FET Integrated
Controller Type PWM
Vin1(Min.)[V] 8.0
Vin1(Max.)[V] 18.16
Start Circuit [V] 650.0
SW frequency(Max.)[KHz] 65.0
Vcc OVP Auto Restart
On Resistor (MOSFET)[Ω] 1.9
Channel 1
Light Load mode Yes
Soft Start Yes
Thermal Shut-down Yes
Under Voltage Lock Out Yes
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 105
특징 :
    • PWM frequency: 65kHz
    • PWM current mode method
    • Frequency hopping function
    • Burst operation at light load
    • Frequency reduction function
    • Built-in 650V start circuit
    • Built-in 650V switching MOSFET
    • VCC pin under voltage protection
    • VCC pin over voltage protection
    • Over current limiter function per cycle
    • Soft start function
로옴은 언제든지 사양을 변경할 수 있습니다.
기술 정보
Application Note

Thermal Resistance