2.7V~5.5V 입력, 3.0A MOSFET 내장 1ch 동기정류 강압 DC/DC 컨버터 - BD9B301MUV-LB 본 제품은 산업기기 시장용으로, 장기간 공급을 보증하는 제품입니다.
| ||||
형명 | 상태 | 패키지 | 포장 수량 | 최소 포장 단위 | 포장 사양 | RoHS |
---|---|---|---|---|---|---|
BD9B301MUV-LBE2 | 공급중 | VQFN016V3030 | 3000 | 3000 | Taping | Yes |
Grade | Industrial |
ch | 1 |
Integrated FET / Controller | Integrated FET |
Buck / Boost / Buck-Boost / Inverting | Buck |
Synchronous / Nonsynchronous | Synchronous |
Vin1(Min.)[V] | 2.7 |
Vin1(Max.)[V] | 5.5 |
Vout1(Min.)[V] | 0.8 |
Vout1(Max.)[V] | 4.4 |
Iout1(Max.)[A] | 3.0 |
SW frequency(Max.)[MHz] | 2.0 |
Light Load mode | Yes |
EN | Yes |
PGOOD | Yes |
Operating Temperature (Min.)[°C] | -40 |
Operating Temperature (Max.)[°C] | 125 |
- Long Time Support Product for Industrial Applications
- Synchronous Single DC/DC Converter
- Constant on-time control suitable to Deep-SLLM
- Over Current Protection
- Short Circuit Protection
- Thermal Shutdown Protection
- Under Voltage Lockout Protection
- Adjustable Soft Start
- Power Good Output
- VQFN016V3030 Package (Backside Heat Dissipation)
형명 | 제품 이름 | 패키지 | Datasheet | 유통 재고 |
---|---|---|---|---|
BD9G102G-LB | 6V to 42V, 0.5A 1ch Simple Buck Converter Integrated FET | SSOP6 | 구입 | |
BD9E103FJ | 7V to 28V Input, 1.5A Integrated MOSFET Single Synchronous Buck DC/DC Converter | SOP-J8 | 구입 | |
BD9S200MUF-C | 2.7V to 5.5V Input, 2A Integrated MOSFET Single Synchronous Buck DC/DC Converter For Automotive | VQFN16FV3030 | 구입 | |
BD9S400MUF-C | 2.7V to 5.5V Input, 4A Integrated MOSFET Single Synchronous Buck DC/DC Converter For Automotive | VQFN16FV3030 | 구입 | |
BD9F800MUX | 4.5V to 28V Input, 8.0A Integrated MOSFET Single Synchronous Buck DC/DC Converter | VQFN11X3535A | 문의 | |
BD9B333GWZ | Single Synchronous Buck DC/DC Converter, 2.7V to 5.5V Input, 3.0A Integrated MOSFET | UCSP35L1 | 문의 |
Industrial DC/DC Buck Converters BD9x Series
BD9B301MUV-EVK-101 (3.3 | 3A Output)
This application note explains the calculation of external capacitor value for buck converter IC circuit.
This application note covers the steps required in choosing the inductor and to calculate the value used in buck regulator IC circuits.
This Application Note offers reference table to easily set resistor values for output voltage with various internal reference voltages VREF.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
Using unmatched MLCC may not obtain required target characteristics for power supply circuit and may cause abnormal operation. This application note explains the important points while using MLCC.
This application note describes how to obtain the power loss required to calculate the temperature of a semiconductor device. Temperature control is important to ensuring product reliability.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
This application note explains the features and things to consider when shopping for power inductors.
In buck converter ICs, many high-frequency noises are generated at switch nodes. A snubber circuit provides one way of eliminating such harmonic noise. This application note explains how to set up the RC snubber circuits.
This application note explains power loss factors and methods for calculating them. It also explains how the relative importance of power loss factors depends on the specifications of the switching power source.
This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.
For ICs