Downloading...

8V-35V 입력, 1.5A 1ch 강압 DC/DC 컨버터 - BD9701T-V5

BD9701T-V5는 PWM 방식의 승위칭 레귤레이터입니다. 경부하 시의 고효율화를 위해 Pch 스위칭 FET를 내장하였습니다. 또한, Bi-CMOS 프로세스 채용을 통해 회로전류 4mA (Typ.), 스탠바이 시 회로전류 0μA (Typ.)를 실현하여 세트의 저소비전류화에 기여합니다.

* 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다.
형명
상태
패키지
포장 수량
최소 포장 단위
포장 사양
RoHS
BD9701T-V5 공급중 TO220FP-5(V5) 500 500 Taping Yes
 
사양 :
Grade Standard
ch 1
Integrated FET / Controller Integrated FET
Buck / Boost / Buck-Boost / Inverting Buck
Synchronous / Nonsynchronous Nonsynchronous
Vin1(Min.)[V] 8.0
Vin1(Max.)[V] 35.0
Vout1(Min.)[V] 1.0
Vout1(Max.)[V] 32.0
Iout1(Max.)[A] 1.5
Vin3(Min.)[V] 8.0
Vin3(Max.)[V] 35.0
Vout3(Min.)[V] 1.0
Vout3(Max.)[V] 32.0
Iout3(Max.)[A] 1.5
SW frequency(Max.)[MHz] 0.1
Light Load mode No
EN Yes
PGOOD No
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
 
 
관련 상품
관련 신제품 / 갱신 제품파워 매니지먼트
형명 제품 이름 패키지 Datasheet 유통 재고
BD9701T 8V-35V 입력, 1.5A 1ch 강압 DC/DC 컨버터 TO220FP-5   구입
BD9701CP-V5 8-35V 1.5A 1ch Buck converter TO220CP-V5   문의
BD9701FP 8-35V 1.5A 1ch Buck converter TO252-5   문의
New Products:
 
 
기술 정보
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Calculation of Power Loss (Synchronous)

This application note describes how to obtain the power loss required to calculate the temperature of a semiconductor device. Temperature control is important to ensuring product reliability.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Resistor Value Table to set Output Voltage of Buck Converter IC

This Application Note offers reference table to easily set resistor values for output voltage with various internal reference voltages VREF.

Snubber Circuit for Buck Converter IC

In buck converter ICs, many high-frequency noises are generated at switch nodes. A snubber circuit provides one way of eliminating such harmonic noise. This application note explains how to set up the RC snubber circuits.

Capacitor Calculation for Buck converter IC

This application note explains the calculation of external capacitor value for buck converter IC circuit.

Inductor Calculation for Buck converter IC

This application note covers the steps required in choosing the inductor and to calculate the value used in buck regulator IC circuits.

Efficiency of Buck Converter

This application note explains power loss factors and methods for calculating them. It also explains how the relative importance of power loss factors depends on the specifications of the switching power source.

The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit

Using unmatched MLCC may not obtain required target characteristics for power supply circuit and may cause abnormal operation. This application note explains the important points while using MLCC.

Considerations for Power Inductors Used for Buck Converters

This application note explains the features and things to consider when shopping for power inductors.