Downloading...
 
product-image
 

입력전압 5V~35V 출력 스위치 전류 2A 1ch 강압 DC/DC 컨버터 - BD9060HFP-C

고정밀도 주파수 플렉시블 강압 스위칭 레귤레이터는 외장 저항을 통해 동작 주파수를 자유롭게 설정할 수 있는 고내압 파워 MOSFET 내장 스위칭 레귤레이터입니다. 넓은 입력전압 범위 (5~35V), 높은 주파수 정밀도 ±5% (f=200~500kHz)가 특징이며, 외부 동기 입력 단자를 통해 입력된 외부 클록과 동기 동작이 가능합니다. 출력 콘덴서는 세라믹 콘덴서에 대응하고 있습니다.

형명
상태
패키지
포장 수량
최소 포장 단위
포장 사양
RoHS
BD9060HFP-CTR 공급중 HRP7 2000 2000 Taping Yes
 
사양 :
Grade Automotive
ch 1
Vin1(Min.)[V] 5.0
Vin1(Max.)[V] 35.0
Vout1(Min.)[V] 0.8
Vout1(Max.)[V] 35.0
Iout1(Max.)[A] 2.0
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 125
특징 :
  • ・ Minimal external components
    ・ P-ch POWER MOSFET included in the package
    ・ Low dropout:100% ON duty cycle
    ・ External synchronization enabled
    ・ Soft start function: soft start time fixed to 2.7ms (Typ)
    ・ Built-in overcurrent protection circuit
    ・ Built-in thermal shutdown protection circuit
 
 
관련 상품
관련 신제품 / 갱신 제품파워 매니지먼트
형명 제품 이름 패키지 Datasheet 유통 재고
BD9060F-C 입력전압 5V~35V 출력 스위치 전류 2A 1ch 강압 DC/DC 컨버터 SOP8   구입
New Products:
 
 
기술 정보
SPICE Model

BD9060HFP-C, BD9060F-C PSPICE

SPICE Model

BD9060HFP-C, BD9060F-C PSPICE

SPICE Modeling Report

SPICE Modeling Report - BD9060HFP-C 1ch Step-Down Switching Regulator

SPICE Modeling Report

SPICE Modeling Report - BD9060HFP-C 1ch Step-Down Switching Regulator

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Calculation of Power Loss (Synchronous)

This application note describes how to obtain the power loss required to calculate the temperature of a semiconductor device. Temperature control is important to ensuring product reliability.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Resistor Value Table to set Output Voltage of Buck Converter IC

This Application Note offers reference table to easily set resistor values for output voltage with various internal reference voltages VREF.

Snubber Circuit for Buck Converter IC

In buck converter ICs, many high-frequency noises are generated at switch nodes. A snubber circuit provides one way of eliminating such harmonic noise. This application note explains how to set up the RC snubber circuits.

Capacitor Calculation for Buck converter IC

This application note explains the calculation of external capacitor value for buck converter IC circuit.

Inductor Calculation for Buck converter IC

This application note covers the steps required in choosing the inductor and to calculate the value used in buck regulator IC circuits.

Efficiency of Buck Converter

This application note explains power loss factors and methods for calculating them. It also explains how the relative importance of power loss factors depends on the specifications of the switching power source.

The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit

Using unmatched MLCC may not obtain required target characteristics for power supply circuit and may cause abnormal operation. This application note explains the important points while using MLCC.

Considerations for Power Inductors Used for Buck Converters

This application note explains the features and things to consider when shopping for power inductors.