Downloading...
 
product-image
 

35V 내압 1A LDO 레귤레이터 - BD50C0AWFP2-C

BD50C0AWFP2-C는 1A까지 공급 가능한 저포화 타입 레귤레이터입니다. 본 IC는 출력 단락 등으로 인한 IC 파괴를 방지하는 과전류 보호, 과부하 상태 등으로 인한 열파괴로부터 IC를 보호하는 온도 보호회로를 내장하고 있습니다.

FAQ 
구입 
현재 온라인 판매처에 재고가 없으므로, 별도로 문의하여 주십시오. 문의
형명
상태
패키지
포장 수량
최소 포장 단위
포장 사양
RoHS
BD50C0AWFP2-CE2 공급중 TO263-5F 500 500 Taping Yes
 
사양 :
Grade Automotive
Breakdown Voltage(Max.)[V] 35.0
ch 1
Vin(Min.)[V] 4.0
Vin(Max.)[V] 26.5
Vout (Typ.) [V] 5
Vout Precision ±1.0
Iout(Max.)[A] 1.0
Circuit Current[mA] 0.5
Shutdown Function Yes
Thermal Shut-down Yes
Over Current Protection Yes
I/O Voltage Difference (Typ.)[V] 0.3(Io=500mA)
Ripple Rejection [dB] 55.0
Load Regulation[mV] 0.05(Io=5mA to 1A)
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 125
특징 :
  • ・최대출력전류 1A
    ・출력전압 정밀도 ±1%
    ・PDMOS 출력으로 저포화형
 
 
관련 상품
관련 신제품 / 갱신 제품파워 매니지먼트
형명 제품 이름 패키지 Datasheet 유통 재고
BD00C0AWFP-C 35V 내압 1A LDO 레귤레이터 TO252-5   구입
BD33C0AWFP-C 35V 내압 1A LDO 레귤레이터 TO252-5   구입
BD50C0AWFP-C 35V 내압 1A LDO 레귤레이터 TO252-5   구입
BD80C0AWFP-C 35V 내압 1A LDO 레귤레이터 TO252-5   구입
BD90C0AWFP-C 35V 내압 1A LDO 레귤레이터 TO252-5   구입
BD33C0AFP-C 35V 내압 1A LDO 레귤레이터 TO252-3   구입
New Products:
 
 
기술 정보
Table of resistance for output voltage setting on linear regulator Ics

This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

BDxxC0A, BDxxD0A Series PCB Layout

The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.