Downloading...
 
product-image
 

500mA Output LDO Regulator with Voltage Detector - BD42754FP2-C

BD42754FP2-C is automotive suited voltage regulator with 1ch Reset and offers the output current of 500mA while limiting the low quiescent current. This regulator is therefore ideal for applications requiring a direct connection to the battery and a low current consumption. A reset signal is generated for an output voltage VO of Typ 4.62 V. The reset delay time can be programmed by the external capacitor.

형명
상태
패키지
포장 수량
최소 포장 단위
포장 사양
RoHS
BD42754FP2-CE2 공급중 TO263-5F 500 500 Taping Yes
 
사양 :
Grade Automotive
ch 1
Vin(Min.)[V] 5.5
Vin(Max.)[V] 45.0
Vout (Typ.) [V] 5
Vout Precision ±2.0%
Iout(Max.)[A] 0.5
Circuit Current[mA] 0.075
Shutdown Function No
Thermal Shut-down Yes
Over Current Protection Yes
Under Voltage Lock Out Yes
Ripple Rejection [dB] 60.0
Load Regulation[mV] 10
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 150
특징 :
    • AEC-Q100 qualified.
    • Low ESR ceramic capacitors applicable for output.
    • Low drop voltage: PDMOS output transistor
    • Power on and under-voltage reset
    • Programmable reset delay time by external capacitor.
 
 
관련 상품
관련 신제품 / 갱신 제품파워 매니지먼트
형명 제품 이름 패키지 Datasheet 유통 재고
BD42754FPJ-C 500mA Output LDO Regulatorwith Voltage Detector TO252-J5   구입
BD4269EFJ-C 300mA LDO 레귤레이터 + 2ch RESET HTSOP-J8   구입
BD4269FJ-C 200mA LDO 레귤레이터 + 2ch RESET SOP-J8   구입
BD4275FP2-C 500mA LDO 레귤레이터 + Voltage Detector TO263-5F   구입
BD4275FPJ-C 500mA LDO 레귤레이터 + Voltage Detector TO252-J5F   문의
New Products:
 
 
기술 정보
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.