50mA Output Voltage Tracker - BD42500G-C

The BD42500G-C is low quiescent regulators featuring 45V absolute maximum voltage, and output voltage tracking accuracy of ± 15mV, 50mA output current and 40µA (Typ) current consumption. This tracker is therefore ideal for applications requiring a direct connection to the battery and a low current consumption. Ceramic capacitors can be used for compensation of the output capacitor phase. Furthermore, this IC also feature overcurrent protection to protect the device from damage caused by short-circuiting and an integrated thermal shutdown to protect the device from overheating at overload conditions.

포장 수량
최소 포장 단위
포장 사양
BD42500G-CTR 공급중 SSOP5 3000 3000 Taping Yes
사양 :
Grade Automotive
ch 1
Vin(Min.)[V] 3.0
Vin(Max.)[V] 42.0
Iout(Max.)[A] 0.05
Circuit Current[mA] 0.04
Thermal Shut-down Yes
Over Current Protection Yes
특징 :
    • AEC-Q100 Qualified
    • Qualified for Automotive Applications
    • Wide Temperature Range (Tj) : -40 °C to +150 °C
    • Wide Operating Input Range: 3V to 42V
    • Low Quiescent Current: 40µA (Typ)
    • Output Voltage Tracking Accuracy: ±15mV
    • Over Current Protection (OCP)
    • Thermal Shutdown Protection (TSD)
관련 상품
관련 신제품 / 갱신 제품파워 매니지먼트
형명 제품 이름 패키지 Datasheet 유통 재고
BD42530FPJ-C 250mA Output Voltage Tracker TO252-J5   구입
BD42540FJ-C 70mA Output Voltage Tracker SOP-J8   구입
BD42530EFJ-C 250mA Output Voltage Tracker HTSOP-J8   구입
BD42530FP2-C 250mA Output Voltage Tracker TO263-5   구입
BD3925FP-C 오토모티브 500mA Voltage Tracker TO252-5   구입
BD3925HFP-C 오토모티브 500mA Voltage Tracker HRP5   구입
New Products:
기술 정보
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.