Downloading...
 
product-image
 

Linear Regulator for High Fidelity Audio - BD37201NUX

BD37201NUX is a linear regulator of low noise (4.7μVrms) which is most suitable to high quality audio system. It operates at 2.7V to 5.5V and capable of supplying a maximum load of 500mA. In addition to the low noise, BD37201NUX has a high PSRR and good input transient fluctuation characteristic which makes it suitable for the stabilization of DC/DC converter output, and an ideal power supply to high precision analog circuits such as D/A converter (DAC) and Clock generator. Furthermore, when BD37201NUX is placed in standby mode, the supply current can be as small as 0μA (Typ) which can greatly reduce power consumption.

* 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다.
형명
상태
패키지
포장 수량
최소 포장 단위
포장 사양
RoHS
BD37201NUX-TR 공급중 VSON008X2030 4000 4000 Taping Yes
 
사양 :
ch 1
Vin(Min.)[V] 2.7
Vin(Max.)[V] 5.5
Iout(Max.)[A] 0.5
Output Voltage Noise (Typ.) [μVrms] 4.72
PSRR 74dB(100Hz), ≧50dB(1MHz)
Circuit Current[mA] 1.33
Input Transient Response (Typ.)[mV] 5.0
Shutdown Function No
Standby Current (Typ.)[μA] 0.0
Thermal Shut-down Recover
Over Current Protection Yes
Under Voltage Lock Out Yes
Soft Start Variable
Load Regulation[mV] 3
특징 :
    • Ultra Low Noise, High PSRR
    • Stable at 1µF ceramic input and output capacitors
    • Standby Mode that is controlled by Enable pin
    • Dropout Voltage: 200mV (at 500mA load)
    • Under Voltage Lockout Protection, Current Limit and Short Circuit Protection, Thermal Shutdown Protection
 
 
관련 상품
관련 신제품 / 갱신 제품파워 매니지먼트
형명 제품 이름 패키지 Datasheet 유통 재고
BD37210MUV Linear Regulator for High Fidelity Audio VQFN020V4040   문의
BD37215MUV Negative Voltage Linear Regulator for High Fidelity Audio VQFN020V4040   구입
New Products:
 
 
기술 정보
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.