35V 내압 1A LDO 레귤레이터 - BD33FC0WEFJBD33FC0WEFJ는 1A까지 공급 가능한 저포화 타입 레귤레이터입니다. BDxxFC0WEFJ 시리즈는 출력전압을 외부 저항으로 설정하는 가변 타입과 고정 타입을 구비하고 있으며, 패키지는 HTSOP-J8을 채용하였습니다. 본 시리즈는 출력 단락 등으로 인한 IC 파괴를 방지하는 과전류 보호, 과부하 상태 등으로 인한 열파괴로부터 IC를 보호하는 온도 보호회로를 내장하고 있습니다.
| ||||
| * 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다. | ||||
| Grade | Standard |
| Breakdown Voltage(Max.)[V] | 35.0 |
| ch | 1 |
| Vin(Min.)[V] | 4.0 |
| Vin(Max.)[V] | 26.5 |
| Vout (Typ.) [V] | 3.3 |
| Vout Precision | ±1 |
| Iout(Max.)[A] | 1.0 |
| Circuit Current[mA] | 0.5 |
| Shutdown Function | Yes |
| Thermal Shut-down | Yes |
| Over Current Protection | Yes |
| Over Voltage Protection | No |
| Discharge Function | No |
| Soft Start | No |
| Operating Temperature (Min.)[°C] | -25 |
| Operating Temperature (Max.)[°C] | 85 |
- · Output current capability: 1A
· High output voltage accuracy (Ta=25℃): ±1%
· Low saturation with PDMOS output
· Built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits
· Built-in thermal shutdown circuit for protecting the IC from thermal damage due to overloading
· Low ESR Capacitor
· HTSOP-J8 package
| 형명 | 제품 이름 | 패키지 | Datasheet | 유통 재고 |
|---|---|---|---|---|
| BD00FC0WFP | 35V 내압 1A LDO 레귤레이터 | TO252-5 | 구입 | |
| BD30FC0WFP | 35V 내압 1A LDO 레귤레이터 | TO252-5 | 문의 | |
| BD33FC0WFP | 35V 내압 1A LDO 레귤레이터 | TO252-5 | 구입 | |
| BD50FC0WFP | 35V 내압 1A LDO 레귤레이터 | TO252-5 | 구입 | |
| BD60FC0WFP | 35V 내압 1A LDO 레귤레이터 | TO252-5 | 문의 | |
| BD70FC0WFP | 35V 내압 1A LDO 레귤레이터 | TO252-5 | 문의 |
This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…
A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...
Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.
A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...
Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...
The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...
When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.
This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.
This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.
Provides some hints on how to connect LDOs in parallel.
For ICs