500mA 출력 3단자 레귤레이터 - BA78M24CP

로옴의 3단자 레귤레이터는 출력전압 고정으로 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, 24V의 11종류를 구비하고 있습니다. 전류 용량도 0.5A, 1A의 2가지 타입을 구비하여, 패키지와의 조합에 따라 풍부한 라인업을 제공합니다. 타사의 3단자 레귤레이터와 pin-to-pin 호환이 가능하므로, 본 시리즈로 다양한 세트의 전원회로를 구성할 수 있습니다. 또한, 과전류보호 / 과전압보호 / 안전동작영역 제한회로 등 각종 보호회로를 탑재하여, 높은 신뢰성을 실현합니다.

* 본 제품은 STANDARD GRADE 제품입니다. 이 제품은 차재 기기의 사용을 권장하지 않습니다.
포장 수량
최소 포장 단위
포장 사양
BA78M24CP-E2 공급중 TO220CP-3 500 500 Taping Yes
사양 :
Grade Standard
Breakdown Voltage(Max.)[V] 35.0
ch 1
Vin(Min.)[V] 27.0
Vin(Max.)[V] 33.0
Vout (Typ.) [V] 24
Vout Precision ±4.0%
Iout(Max.)[A] 0.5
Circuit Current[mA] 4.5
Shutdown Function No
Thermal Shut-down Yes
Over Current Protection Yes
Over Voltage Protection No
Discharge Function No
Soft Start No
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
특징 :
  • ・과전류 보호회로, 열 차단회로 내장
    ・우수한 Ripple rejection 특성
    ・TO220CP-3, TO252-3 패키지로 넓은 응용범위
단자 배치도 :
Pin Configration
관련 상품
관련 신제품 / 갱신 제품파워 매니지먼트
형명 제품 이름 패키지 Datasheet 유통 재고
BA78M05CP 500mA 출력 3단자 레귤레이터 TO220CP-3   구입
BA78M06CP 500mA 출력 3단자 레귤레이터 TO220CP-3   구입
BA78M07CP 500mA 출력 3단자 레귤레이터 TO220CP-3   구입
BA78M08CP 500mA 출력 3단자 레귤레이터 TO220CP-3   구입
BA78M09CP 500mA 출력 3단자 레귤레이터 TO220CP-3   구입
BA78M10CP 500mA 출력 3단자 레귤레이터 TO220CP-3   구입
New Products:
기술 정보
Table of resistance for output voltage setting on linear regulator Ics

This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Thermal Design for Three-Terminal Voltage Regulators

Three terminal regulators provide a simple, effective, and stable solution to power voltage regulation requirements. Some applications, however, require special techniques to deal with concerns about overheating...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.