BD63715AEFV
고성능 · 고신뢰성 36V 내압 스테핑 모터 드라이버

BD63715AEFV는 전원 정격 36V, 출력전류 정격 1.5A의 저소비 바이폴라 PWM 정전류 구동 드라이버입니다. 입력 인터페이스는 CLK-IN 구동 방식을 채용하였으며, 여자 (励磁) 모드는 내장 DAC를 통해 FULL STEP, HALF STEP (2종류), QUATER STEP 모드에 대응합니다. 전류 감쇠 방식으로는 FAST DECAY / SLOW DECAY 비율을 자유롭게 설정할 수 있어, 모든 모터에 대해 최적의 제어 상태를 실현할 수 있습니다. 또한, 전원도 1계통으로 구동할 수 있어, 세트 설계가 용이합니다.

Data Sheet 구입 *
* 본 제품은 STANDARD GRADE 제품입니다.
이 제품은 차재 기기의 사용을 권장하지 않습니다.

Product Detail

 
형명 | BD63715AEFV-E2
상태 | 추천품
패키지 | HTSSOP-B28
포장 수량 | 2500
최소 포장 단위 | 2500
포장 사양 | Taping
RoHS | Yes

사양 :

Power Supply Voltage (Max.) [V]

28

Power Supply Voltage (Min.) [V]

19

Vcc (Max.)[V]

36

Iout (Max.)[A]

1.5

Iout Peak (Max.)[A]

2

Output On Resistance (Typ.)[Ω]

0.95

Step

to 1 / 4

MIX DECAY Function

Yes

Single power supply input

Yes

Automotive class

No

Interface

CLK-IN

Operating Temperature (Min.)[°C]

-25

Operating Temperature (Max.)[°C]

85

Package Size [mm]

9.7x6.4 (t=1)

Find Similar

특징 :

  • Rated output current(DC)1.5A
  • Low ON resistance DMOS output
  • CLK-IN drive mode
  • PWM constant current(other oscillation)Built-in spike noise cancel function
    (external noise filter is unnecessary)
  • Full-, half(two kinds)-, quarter-step functionality
  • Freely timing excitation mode switch
  • Current decay mode switch
    (linearly variable FAST/SLOW DECAY ratio)
  • Normal rotation & reverse rotation
    switching function
  • Power save function
  • Built-in logic input pull-down resistor
  • Power-on reset function
  • Thermal shutdown circuit(TSD)
  • Over-current protection circuit(OCP)
  • Under voltage lock out circuit(UVLO)
  • Over voltage lock out circuit(OVLO)
  • Ghost Supply Prevention(protects against
    malfunction when power supply is disconnected)
  • Adjacent pins short protection
  • Microminiature, ultra-thin and high heat-radiation
    (exposed metal type) package

Reference Design / Application Evaluation Kit

 
    • Evaluation Board - BD63715AEFV-EVK-001
    • This evaluation board is a board for driving the stepping motor with a ROHM's stepping motor driver BD63715AEFV. Motor drive and driver The motor can be driven by VCC for power supply and 5V power supply for control signal. Drive / stop and excitation modes can be set with an external switch. The input interface adopts the CLK-IN drive system, and the excitation mode supports FULL STEP, HALF STEP, QUATER STEP, 1/8 STEP, and 1/16 STEP mode by the built-in DAC.

  • User Guide
X

Most Viewed