BD1LB500EFJ-C
오토모티브용 1ch Low-side 스위치
BD1LB500EFJ-C
BD1LB500EFJ-C
오토모티브용 1ch Low-side 스위치
BD1LB500EFJ-C는 오토모티브용 1ch Low-side 스위치입니다. 과전류 제한 회로, 서멀 셧다운 회로, 오픈 검출회로, 저전압 보호회로를 내장하고 있으며, 이상 검출 시의 진단 출력 기능도 구비하고 있습니다.
Product Detail
기능 안전:
카테고리 : FS supportive
A product that has been developed for automotive use and is capable of supporting safety analysis with regard to the functional safety.
사양 :
Generation
GEN1
Function
Standard / Error Flag
Channel Number [ch]
1
Drain-Source Voltage (Max.)[V]
42
Output Current[A]
0.8
ON Resistance(Typ.)[mΩ]
350
Over Current Detect [A]
0.8
Active Clamp Energy [mJ]
25
Supply Voltage(Min.)[V]
3.5
Supply Voltage(Max.)[V]
5.5
Current consumption(Typ.)[µA]
500
Thermal Shut Down
Self-restart
Open Load Detect [V]
2
Status Terminal
Available
Junction Temperature Tj (Min.)[°C]
-40
Junction Temperature Tj (Max.)[°C]
150
Package Size [mm]
4.9x6 (t=1)
Common Standard
AEC-Q100 (Automotive Grade)
특징 :
- Built-in overcurrent limiting circuit
- Built-in thermal shutdown circuit(TSD)
- Built-in open load detection circuit(at output OFF)
- Enables direct control from CMOS logic ICs, etc.
- Low standby current
- Built-in under voltage lock out circuit
- Built-in diagnostic output(ST) terminal
- Low ON resistance RDS(ON) =350mΩ(Typ) (VDD=IN=5V, Ta=25°C, IOUT=0.25A)
- Built-in overvoltage protection(active clamp) for output circuit
- Monolithic power IC in which the control unit(CMOS) and power MOSFET are incorporated into one chip
- 1ch low side switch for driving mechanical relay coil
- AEC-Q100 Qualified(Grade 1)
